 Naked Streetbike 125cc
Using a wealth of knowledge at one of Europe’s leading Motorcycle design centres, linked with a well respected UK vehicle production and engineering company, the functionality, reliability and sheer stunning appearance has been crafted into what is truly a desirable series of Megelli Naked motorcycles.
 |
Naked Streetbike 125cc Specification
| 125cc Naked Motorcycle Engine Spec |
| Cylinders |
Single Cylinder Ceramic Coated |
| Bore x Stroke (mm) |
56.5 x 49.5 |
| Displacement (cc) |
124.1 |
| Compression Ratio |
10:1 |
| Compressor (kgf/cm2) |
12+-2 |
| Carburettor Type |
Mikuni |
| Idle Speed (RPM) |
1400 +-100 |
| Valve Train |
SOHC |
| Max Power (Hp/RPM) |
11/8500 |
| Max Torque (Nm/RPM) |
9.0/7500 |
| Lubrication System: |
Forced & Wet Sump |
| Fuel Grade: |
Unleaded |
| Clutch: |
Wet Type & Multi Plates |
| Trans: |
5 Speed Gear Change |
| Gear Shift Pattern: |
1-N-2-3-4-5 |
| Ignition System: |
C.D.I |
| Starter System: |
Electrical Start |
| 125cc Naked Motorbike Body Spec |
| Rear Swing Arm: |
T6 Aluminum Trellis with forger dropouts |
| Out Riggers: |
T6 Aluminum forged Twin Plate Bearing Carrier (upper & lower) |
| Steering System: |
Twin Plate Bearing Carrier (upper & lower) |
| Yokes: |
T6 Aluminum Forged |
| Front Forks: |
Conventional |
| Rear Shock: |
Fast Ace |
| Seat Height: |
800mm |
| Wheel Base: |
1349.6mm |
| Wheel Size Front Laced Aluminum Rim: |
17:2.75 |
| Wheel Size Rear Laced Aluminum Rim: |
17: 3.5 |
| Tyre Size Front: |
CST 100/70-17 TL |
| Tyre Size Rear: |
CST 130/70-17 TL |
| Final Drive: |
Cushioned |
| Net Weight: |
110Kg approx |
| Main Frame: |
A12 Multi Twin Spar Trellis Configuration |
|
*Technical specification subject to change without notice. |
|
The Megelli 125cc Streetbike ...
Click here for Megelli Naked Streetbike 125cc Genuine Parts
Megelli Streetbike 125cc Reviews
Megelli Streetbike 125cc Press Articles
Megelli Streetbike 125cc Videos
For more information on our range of 125cc Naked Streetbike motorcycles, or to find your nearest Megelli dealer, please contact us
|
